Rock Chip Assays up to 6.2% Li2O
Released
Released
Announcement PDF
ASX Announcement
ASX:DY6
14 March 2024
Rock Chip Assays up to 6.2% Li2O
from Initial Reconnaissance
HIGHLIGHTS
DY6 has undertaken the first lithium focused exploration program reported in Malawi –
initial reconnaissance indicates huge potential for a major Li discovery
Initial ground reconnaissance sampling at Mzimba South licence returned grades of 6.2%
Li2O (lepidolite mica) and 0.3% Li2O (pegmatite rock assemblage), and also high in
cesium and rubidium with significant potential for LCT pegmatite hosted mineralisation
The first pass program at Mzimba South consisted of 8 samples from 5 outcrop locations,
where artisanal workers have been excavating pegmatites for gemstones (tourmaline,
aquamarine and beryl)
The exposed pegmatites are heavily kaolonised, with the lepidolite and quartz zones
appearing less weathered
A recent follow-up rock chip sampling program consisting of 6 samples from 6 outcrop
locations has been undertaken at Mzimba South and Central, with samples being
prepared for dispatch to SGS South Africa
The Mzimba licences cover a very large area (710.5km2) and remain significantly
underexplored for LCT pegmatites
DY6 has recently submitted environmental and social management plans (ESMPs) for
Mzimba, Karonga and Tundulu, with the licences expected to be granted in the coming
weeks
Following grant, DY6 is preparing to undertake a more detailed mapping and sampling
program across these new lithium projects
DY6 Metals Ltd (ASX: DY6) (“DY6”, the “Company”) is pleased to provide this update to shareholders on
its initial lithium focused ground reconnaissance program completed late last year at its Mzimba South
(Figure 1) and Afro Gifts (Karonga South) licence (Figure 2).
Registered Office
Level 8, 99 St Georges Terrace
Perth WA 6000
P: +61 8 9486 4036
E: info@dy6metals.com
dy6metals.com
Figure 1. Location map of the Mzimba Lithium Projects (Central, West, and South)
Assay results were received from eight (8) samples from Mzimba and eleven (11) samples from Karonga
project (Afro Gifts Licence Area) providing indications of locally fractionated pegmatite systems which
have the potential to host lithium mineralisation. The Mzimba samples were collected from an artisanal
mining area in the Southern licence targeting gemstones with the pegmatites identified by observing the
presence of weathered quartz, large flakes of weathered biotite, muscovite and phlogopite micas and
kaolinised feldspars (Figure 3).
dy6metals.com | ASX:DY6
2
Figure 2. Location map of Karonga Li Project, granted licence EPL0659, which adjoins the Company’s
recent licence application (APL0526)
dy6metals.com | ASX:DY6
3
Figure 3. Core of the opened pegmatite showing Quartz crystals, books of Muscovite micas and Kfeldspar with matrix of Albite feldspar
One rock chip sample composed predominantly of Mica with minor Quartz, and Feldspar returned
exceptional Lithium grade (Li2O) of 6.2% and notably high in Cesium (Cs) and Rubidium (Rb), all excellent
LCT mineralisation pathfinders. The samples were collected at the far NE region of the southern licence
with the observance of outcropping along strike direction ranging NNE to WSW. (Figure 4). Furthermore,
on a visual observation perspective, the topography and geology of the three Mzimba tenements are
similar and as such the strike length of the pegmatites of the three tenements combined is significantly
high.
The standout rock chip samples were:
•
0.279% Li2O, 1,018ppm Cs and 3,802ppm Rb (01A)
•
6.20% Li2O, 3,089ppm Cs and >10,000ppm Rb (01C)
The sample (01C) highlighted in (Figure 5a) has a low K:Rb (potassium to rubidium) ratio <7 indicating
the prospectivity of Mzimba with numerous pegmatite zones identified to date. The analysis and
anomalous Rb concentration along with mineral identification implies the presence of lepidolite
mineralisation in the sample. A similar rock chip sample (MZB006) (Figure 5b) was collected from the
same district in a recent field visit in February and appears composed of lithium hosted in Lepidolite mica.
Pegmatites and potential lithium rich micas are evident across the Mzimba prospects with future
exploration work to determine the extent of the lithium bearing pegmatites.
Our early-stage assays of 11 samples of pegmatite intrusions at Karonga South have delivered the
geochemical information required to develop an understanding of the intrusive fractionation processes
that have occurred in the district and identifying the location of fractionated rocks is the first important step
to the discovery of pegmatitic LCT mineralisation. The initial sampling focused on a small area of the Afro
Gifts licence and future exploration in the coming weeks will target a strike zone from South to North.
dy6metals.com | ASX:DY6
4
The Company’s CEO, Mr Lloyd Kaiser said: “We are excited to have identified high grade lithium of
over 6% received from Mzimba’s first pass reconnaissance visit. We believe this was the first real
exploration for lithium in Malawi and given the extensive project areas and noted pegmatite workings by
artisinal miners, we are just starting to scratch the surface here and looking forward to further sampling
over the coming months and positive assay results from these programs
Figure 4. Sampling locations of reported and newly sampled rock chips at Mzimba South and Central.
Arrows (in yellow) indicate the general direction pegmatites are trending (in a NW-SE direction).
dy6metals.com | ASX:DY6
5
A
B
Figure 5. Matrix of Lepidolite Mica (a) and recently collected sample of Lepidolite Mica (b) from
February field trip
The Company’s geological team and CEO undertook a further reconnaissance visit to Mzimba South and
Central district in February and collected Six (6) outcrop samples, three (3) located in Mzimba Central
and three (3) from Mzimba South. The topography, pegmatite outcropping and local geology of the Central
district is similar to the Southern region. During the fieldwork, rock chip samples were taken within the
excavation area of small-scale mining and to the east in the Central district with most pegmatite outcrops
identified as quartz, feldspar, micas and partly superficial deposit of kaolinized feldspar materials. (Figure
6). All samples have been crushed at the Geological Survey Department (GSD) in Zomba ready for
dispatch to SGS laboratory for whole rock assay (Table 1).
Figure 6. Pegmatite outcrop at Mzimba Central
dy6metals.com | ASX:DY6
6
Field Exploration Underway
Further field reconnaissance exploration is currently being planned to commence shortly in March 2024
across the Karonga and Mzimba prospects utilising a portable XRF Analyser (pXRF) to directly identify
key suite of associated pathfinder elements, namely; K, Rb, Cs, Sn along with ultraviolet light ("UV")
techniques. This strategy will ensure a high rate of interpretation of fertility with respect to hosting potential
LCT pegmatites of collected outcrop samples before sending to the laboratory for whole rock chemistry.
There are large areas of Mzimba and Karonga that remain largely unexplored with potential to host lithium
pegmatites along the southern portion of Mzimba South district and across Central and West licence of
Mzimba (Figure 4). DY6 is very optimistic that with further exploration activities, combined with the newly
validated pathfinder vector (K/Rb), will generate new priority exploration targets in H1, 2024.
Licence Update
DY6 Metals Ltd submitted four (4) exclusive prospecting licence applications totalling 746.7km2 in
northern Malawi for tenements it considers to be highly prospective for lithium. The Mzimba licences cover
a large area (710.5km2) and remain significantly underexplored for LCT pegmatites. DY6 recently
received conditional approval from the department of mines upon submission of environmental and social
management plans (ESMPs) for Mzimba, Karonga and Tundulu. The (ESMPs) have been submitted to
the Malawian Environmental Protection Authority (MEPA) and licence approvals are expected in the
coming weeks.
Following granting of the licence’s, DY6 is preparing to undertake a more detailed mapping and rock chip
sampling program across these new lithium projects.
-ENDSThis announcement has been authorised by the Board of DY6.
More information
Mr Lloyd Kaiser
Mr John Kay
Mr Luke Forrestal
CEO
Director & Company Secretary
Investor Relations
lloyd.kaiser@dy6metals.com
john.kay@dy6metals.com
+61 411 479 144
dy6metals.com | ASX:DY6
7
Competent Persons Statement
The Information in this announcement that relates to exploration results, mineral resources or ore reserves
is based on information compiled by Mr Allan Younger, who is a Member of the Australasian Institute of
Mining and Metallurgy. Mr Younger is a consultant of the Company. Mr Younger has sufficient experience
which is relevant to the style of mineralisation and type of deposits under consideration and to the activity
that he is undertaking to qualify as a Competent Person as defined in the 2012 edition of the `Australian
Code for Reporting Exploration Results, Mineral Resources and Ore Reserves’ (the JORC Code). Mr
Younger consents to the inclusion of this information in the form and context in which it appears in this
announcement. Mr Younger holds shares in the Company.
dy6metals.com | ASX:DY6
8
Table 1 – Sampling Locations for Recently Collected Samples from Mzimba Central & Mzimba South Projects
Outcrop ID
Sample
Id
MZX001
MZB001
Eastings
(UTM,
Zones
36S)
561564
MZX002A
MZB002
MZX002B
Northings
(UTM,
Zones 36S)
Outcrop/
Boulder/
Float
Rock Type
Grain
Size
(cm)
Quartz
(%)
Ca/Na
Feldspar
(%)
K
Feldspar
(%)
Mica
(%)
8684645
Outcrop
Pegmatite
1-4
35
5
10
50
561102
8684608
Outcrop
Pegmatite
1-3
40
58
2
2
MZB003
561145
8684612
Outcrop
Pegmatite
1-3
40
58
2
2
NG001
MZB004
563074
8660656
Outcrop
Oligoclase
<1
10
75
10
5
NG002
MZB005
562695
8660624
Float
Oligoclase
<1
9
80
10
1
NG003
MZB006
563056
8660642
Outcrop
Pegmatite
2-5
10
3
7
80
dy6metals.com | ASX:DY6 9
Table 2 – Sample Assay Results of Initial Reconnaissance at Mzimba South & Karonga [Afro Gifts]
SAMPLE
ID
PROJECT
S1
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
Karonga
[Afro Gift]
S2
S3
S4
S5
S6
S8A
S8B
S9
GS1
EASTINGS
(UTM,
Zone 36S)
NORTHINGS
(UTM,
Zone 36S)
590016
8886992
590016
8886992
590016
8886992
590016
8886992
590064
8887068
590064
8887068
590078
8887107
590078
8887107
590149
8887336
590016
8886992
Cu
ppm
<10
15
11904
50
94
30150
30
80
15
40
Al
%
K
%
Li
%
Si
%
Be
ppm
Cs
ppm
Rb
ppm
Sn
ppm
Ta
ppm
(K/Rb)
Ratio
Li2O
(%)
10.68
0.6
0.00
26.7
4
1.4
27
<10
2.2
222
0.00
8.01
0.5
0.00
29.1
8
0.9
20
<10
1.6
250
0.00
3.63
1.6
0.00
29.3
1
3.4
96
<10
2.4
167
0.00
8.52
0.3
0.00
25.2
6
0.7
14
<10
2.3
214
0.00
9.08
0.8
0.00
26.9
7
1.1
27
<10
1.6
296
0.00
1.66
0.8
0.00
28.4
<1
1.7
44
<10
2.1
182
0.00
20.7
0.6
0.00
23.1
3
1.3
25
<10
1.4
240
0.00
4.19
2.2
0.00
29.9
<1
1.7
93
<10
2
237
0.00
7.4
0.7
0.00
29.7
3
1.4
28
24
1.1
250
0.00
24.1
0.6
0.00
19.9
2
1.2
25
14
0.9
240
0.00
dy6metals.com | ASX:DY6 10
SAMPLE
ID
PROJECT
NGANGA
1C (i)
NGANGA
1A
NGANGA
1B (i)
NGANGA
1B (ii)
NGANGA
1C (ii)
NGANGA
1D
NGANGA
1E
Mzimba
South
Mzimba
South
Mzimba
South
Mzimba
South
Mzimba
South
Mzimba
South
Mzimba
South
EASTINGS
(UTM,
Zone 36S)
563092
NORTHINGS
(UTM, Zone
36S)
8660651
Al
%
K
%
Li
%
Si
%
Be
ppm
Cs
ppm
Rb
ppm
Sn
ppm
Ta
ppm
(K/Rb)
Ratio
Li2O
(%)
11.75
7.9
2.88
25.4
34
3089
>10000
24
93
<7
6.20
563117
8660656
15.09
6.1
0.13
22.7
32
1018
3802
23
73.7
16
0.28
563092
8660651
9.67
11.9
0.00
25.9
4
290
5484
34
2.3
22
0.00
563092
8660651
7.3
0.3
0.00
27.2
2
2.6
30
25
1.3
100
0.00
563012
8660651
9.93
0.2
0.00
29.4
6
5.9
36
11
2.2
56
0.00
563012
8660651
9.23
10.5
0.00
27.3
4
153
1880
23
2.2
56
0.00
562652
8660663
8.85
9.8
0.00
24.8
3
47.7
1349
28
1.8
73
0.00
dy6metals.com | ASX:DY6 11
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries
and results assessed.
• Measures taken to maximise sample recovery and ensure
representative nature of the samples.
• Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
• Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
• Reconnaissance random rock chip samples have been collected
intermittently from exposures within the region.
• These are hoped to be representative of the styles of pegmatites
intrusives within the area.
• The samples will not be representative of any mineralisation
potentially within the pegmatites.
Drilling
techniques
Drill sample
recovery
Logging
12
• No drilling undertaken and therefore no drilling techniques are being
reported
• No drilling undertaken and therefore no drill sample recoveries are
being reported
• No drilling undertaken and therefore no geological and geotechnical
logging is being reported
Criteria
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
JORC Code explanation
Commentary
studies.
• Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core
taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
• Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
• Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the material
being sampled.
• The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
13
• No sub-sampling has been undertaken and therefore no reporting of
sub-sampling techniques and sample preparation.
• All six (6) reconnaissance samples are being prepared for
geochemical analysis to be dispatched to SGS commercial laboratory
in Randfontein, Johannesburg, RSA for 4 acid ICP analysis.
• No drilling undertaken therefore no verification of sampling
intersections required.
• Albeit not to be used in Mineral resource Estimation, all sample
locations determined by handheld GPS using WGS 84 datum in Zone
36S.
Criteria
JORC Code explanation
Commentary
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been applied.
• Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
• If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
• The measures taken to ensure sample security.
• Sample type and spacing are not designed to be used in an MRE
because the sampling was of a reconnaissance nature.
• No compositing has been applied.
• The results of any audits or reviews of sampling techniques and data.
• No audits or reviews have been undertaken by DY6 Metals staff.
Orientation
of data in
relation to
geological
structure
Sample
security
Audits or
reviews
• Sampling was of a reconnaissance nature only and was designed to
achieve unbiased sampling.
• No drilling being reported.
• Samples were bagged in the field and delivered to the Malawi
Geological Survey Department (GSD) by DY6 stafffor crushing.
• Samples will be transported with a signed Chain of Custody at every
stage where they change hands until they reach the analysis
laboratory at SGS, Johannesburg.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
• The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
• New approved Exploration Licences APL526 for Karonga and
APL0538, APL0539 and APL0540 for Mzimba South, Mzimba Central
and Mzimba West respectively. Granting of these licences are
pending approval of ESMPs that have been submitted. Licences
wholly owned by DY6Metals through Malawian vehicle GEL.
• No known impediments to jeopardise licence to operate.
Exploration
done by
other parties
• Acknowledgment and appraisal of exploration by other parties.
• The tenement areas have been prospected and intermittently mined
by artisanal miners.
14
Criteria
JORC Code explanation
Commentary
Geology
• Deposit type, geological setting and style of mineralisation.
• The project area occurs within orthogneisses, schist and granulite
units in the Mesoproterozoic Irumide orogenic belt that extends from
around Lundazi in eastern Zambia into Malawi; this belt hosts several
granitic pegmatite swarms which are mined for gemstones including
beryl varieties and other related metal deposit types.
Drill hole
Information
• A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
• In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (eg cutting of high
grades) and cut-off grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
• The assumptions used for any reporting of metal equivalent values
should be clearly stated.
• These relationships are particularly important in the reporting of
Exploration Results.
• If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (eg ‘down hole length, true
width not known’).
• Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
• No drilling undertaken and therefore no drillhole information is being
reported.
Data
aggregation
methods
Relationship
between
mineralisatio
n widths and
intercept
lengths
Diagrams
15
• No data aggregation methods are being used.
• No drilling undertaken and therefore no mineralisation widths have
been reported
• Location maps of projects are within the release with relevant
exploration contained.
Criteria
JORC Code explanation
Commentary
Balanced
reporting
• Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
• Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical
survey results; geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
• The nature and scale of planned further work (eg tests for lateral
extensions or depth extensions or large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
• The reporting of exploration results is considered balanced by the
competent person. The locations of samples are included in this
release.
Other
substantive
exploration
data
Further work
16
• No other exploration to report
• Further surface sampling, mapping and drilling of potential targets is
planned once tenure is granted.
Share your feedback
Discover