Commencement of Maiden Auger Drilling at Central
Released
Released
Announcement PDF
Registered Office
Level 8, 99 St Georges Terrace
Perth WA 6000
P: +61 8 9486 4036
E: info@dy6metals.com
dy6metals.com
DY6 Accelerates Exploration with
Commencement of Maiden Auger Drilling at
Central Rutile Project, Cameroon
HIGHLIGHTS
Auger Drilling underway: DY6 has commenced an initial 91-hole auger drilling
programme at the Central Rutile Project, focused on the Bounde and Nganda
licences. This program follows the identification of high-grade rutile and Heavy Mineral
Sands (HMS) mineralisation from surface and aims to fast-track delineation of priority
zones.
Proven High-Grade Targets: With multiple indicators confirming prospectivity –
including historic BRGM mapping of a 70km x 15km high-grade residual rutile
zone, course rutile nuggets grading up to 97.5% TiO₂1
, and shallow auger
intercepts such as 1.35m @ 0.84% rutile - DY6 is accelerating exploration in
Cameroon.
High-grade rutile from surface: shallow reconnaissance auger drilling at Bounde
returned high-grade rutile from surface:2
o 0.8m @ 0.66% rutile (2.81% HM) from 0m (GRMAU0010)
o 1.35m @ 0.84% rutile (1.23% HM) from 0m (GRMAU0013)
Fast-Tracked Exploration Timeline: Early mobilisation at Central Rutile Project will
reduce the lag between auger results from the recent 24-hole programme at
Alamba/Nsimbo (expected in 5 weeks) and auger results from Bounde and Nganda.
This approach accelerates future resource definition across high-confidence targets.
Strategic Expansion and Capability: DY6’s strengthened in-country team and recently
secured a warehouse for a dedicated HMS laboratory to support continuous drilling
through 2025, ensuring rapid turnaround and sustained exploration momentum.
Targeting Depth Extensions: Equipped with tungsten carbide-reinforced auger
drills, the program will probe deeper into the weathering profile to test for continuity
of high-grade rutile mineralisation at depth, complementing the confirmed high-
grade surface results.
To engage with this announcement, visit the DY6 investor hub.
DY6 Metals Ltd (ASX: DY6, “DY6” or “Company”) is pleased to announce that the Company
has commenced a 91-hole auger drilling programme at its flagship Central Rutile Project in
Cameroon. The programme will initially focus on the Company’s high-priority Bounde and
1
Refer ASX Announcement 11 August 2025, titled: “XRF Analysis confirms high-quality of natural rutile”
2
Refer ASX Announcement 2 September 2025, titled: “High-grade saprolite-hosted rutile confirmed at Central Rutile Project”
ASX Announcement
ASX:DY6
15 October 2025
2
dy6metals.com | ASX:DY6
Nganda licences, located west of the capital of Yaoundé, where DY6 has recently reported
exceptional high-quality rutile grading up to 97.54% titanium (TiO₂)1
and high-grade intercepts
of up to 0.84% rutile from shallow reconnaissance auger drilling.
This early mobilisation reflects DY6’s confidence in the area’s potential and will be conducted
in parallel with the ongoing project-wide soil sampling campaign3
to fast-track exploration
outcomes.
With an expanded in-country team and a newly secured warehouse for a dedicated heavy
mineral sands prep laboratory, the Company is now well-positioned to sustain continuous
drilling throughout the remainder of 2025 and into 2026, accelerating the path towards a
maiden resource at the Central project.
CEO, Cliff Fitzhenry, commented:
“We’re excited to kick off auger drilling this week at our Central Rutile Project, building on the
strong confidence we already have in this region. With BRGM’s mapping of an extensive high-
grade rutile zone, the discovery of coarse rutile nuggets grading up to 97.5% TiO₂, and
consistent high-grade mineralisation from surface in reconnaissance drilling, we see every
reason to move swiftly.
By commencing drilling now, rather than waiting for the balance of the soil sampling
programme, we’re accelerating our exploration timeline and positioning ourselves to deliver a
steady stream of auger results. This proactive approach ensures we maintain momentum and
rapidly advance towards defining a large-scale, high-grade rutile resource.
Our strengthened in-country team and the establishment of a dedicated heavy mineral sands
laboratory mean we’re fully equipped to sustain drilling activity through the end of the year and
into 2026. We believe this focused and fast-tracked programme will unlock significant value
for shareholders as we continue to build on the Central Rutile Project’s potential as a world-
class natural rutile opportunity.”
3
Refer ASX Announcement 22 September 2025, titled: “DY6 Advances Central Rutile Project with Expanded Sampling and Infrastructure Progress”
3
dy6metals.com | ASX:DY6
Figure 1: Planned maiden auger drilling campaign at the Central Rutile Project.
Figure 2: Geological map of the planned maiden auger drilling campaign at the Central Rutile Project.
4
dy6metals.com | ASX:DY6
Figure 3: Hand auger equipment arrives on site.
Figure 4 : Hand auger drilling team at the drill site LIPAU001on the left and DY6 country manager Dr.
Moses Ndasi inspecting the samples on the right.
Cautionary Statement: The images shown are for illustrative purposes only and the company cautions
that, with respect to any visual mineralisation indicators, visual observations and estimates of mineral
abundance and uncertain in nature and should not be taken as a substitute or proxy for appropriate
laboratory analysis. Visual estimates also potentially provide no information regarding impurities or
deleterious physical properties relevant to valuations. Assay results from the sampling programmes will
be required to understand the grade and extent of mineralisation.
5
dy6metals.com | ASX:DY6
Background on the Central Rutile Project
The Central Rutile Project consists of 21 exploration permits under valid applications covering
8,782km2
across an area rapidly emerging as a globally significant rutile province within
Central Cameroon. The project area is predominantly underlain by kyanite-bearing mica schist
and garnet paragneiss bedrock (see Figure 2), which are considered the primary source of
rutile. During in-situ weathering, rutile is liberated from the bedrock and progressively
concentrated and upgraded within the overlying saprolite layer. This forms an in-situ, eluvial
saprolite hosted rutile deposit analogous to Sovereign Metal’s Tier 1 Kasiya deposit in Malawi
(the world’s largest primary rutile deposit at 1.8 billion tons at 1.0% rutile).
The exploration model further proposes that subsequent erosion and fluvial transport rework
these materials, concentrating rutile and other valuable heavy minerals into alluvial deposits.
Historical production figures from the area between 1935 and 1955 have recorded some
15,000 tons of high-purity (>95 %) rutile being produced from 3 main production centres, with
Yaoundé West being one of them. The Central Rutile Project borders Lion Rock’s Minta Rutile
Project where initial sampling has revealed widespread, high-value mineral assemblages with
valuable heavy minerals (VHM) up to 93% of total heavy minerals (THM) and with the
dominant VHM’s being rutile (up to 69.8%), monazite (up to 35.6%) and zircon (up to 21.5%)4
.
Figure 5: Map of Central Cameroon showing DY6’s Central Rutile Project which encompasses
8,782km2
of prime geological terrain highly prospective for residual, natural rutile mineralisation.
-ENDS-
4
Refer Lion Rock Minerals ASX Announcement dated 4 February 2025 “First systematic exploration programme discovers significant rutile province in
Cameroon”
6
dy6metals.com | ASX:DY6
This announcement has been authorised by the Board of DY6.
More information
Mr Daniel Smith Mr Cliff Fitzhenry
Executive Chairman Chief Executive Officer
dan.smith@dy6metals.com Clifford.fitzhenry@dy6metals.com
For Investor or media related enquiries:
Jessica Fertig
Tau Media
jessica@taumedia.com.au
Competent Person Statement
The information contained in this announcement that relates to geological information and exploration
results at the Central Rutile Project, is based on information compiled by Mr Clifford Fitzhenry, a
Competent Person who is a Registered Professional Natural Scientist with the Council for Natural
Scientific Professionals (SACNASP). Mr Fitzhenry is the Company’s CEO and has sufficient experience
which is relevant to the style of mineralization and type of deposit under consideration and to the activity
which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the
‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr
Fitzhenry consents to the inclusion in this announcement of the matters based on his information in the
form and context in which it appears.
Forward-Looking Statements
This announcement may include forward-looking statements and opinions. Forward-looking
statements, opinions and estimates are only predictions and are subject to risks, uncertainties and
assumptions which are outside the control of DY6 Metals Ltd. Past performance is not necessarily a
guide to future performance and no representation or warranty is made as to the likelihood of
achievement or reasonableness of any forward-looking statements, opinions or estimates. Actual
values, results or events may be materially different to those expressed or implied in this
announcement.
Given these uncertainties, readers are cautioned not to place reliance on forward-looking statements,
opinions or estimates. Any forward-looking statements, opinions or estimates in this announcement
speak only at the date of issue of this announcement. Subject to any continuing obligations under
applicable law and the ASX Listing Rules, DY6 does not undertake any obligation to update or revise
any information or any of the forward-looking statements opinions or estimates in this announcement
or any changes in events, conditions or circumstances on which any such disclosures are based.
Share your feedback
Discover